1 . Uses
Topcoat for metal, wood, fiber-glass ABS substrates, Concrete etc.
This is a two-component coating with a combination of aliphatic resin(Part A) and HDI(Part B), specially formulated to provide excellent weather resistance, high solid content, easy to use paint for long-lasting protection.UV absorber,light stabilizer and other additive are also introduced into the system in order to get the high quality.
Solids Content： 53+±3%
Adhesion ≤Grade 2
4.Method of Application:
Paint Ratio: Paint:Hardner:Thinner= 1:0.6-0.8:0.7-1
Application Viscosity: 10±1S（Coating Cup 4#,Spray）
Application Solid Content:34%
Method of application: Electrostatic spray, conventional spray (preferred), Brushing, use roller for small areas.
Surfaces should be clean, dry and wax-free.
Calculated Coverage: 10-12m2/kg （Actual data may also depend on the apply method, surface as well as other applied environment.）
Touch Dry ( minutes)
Hard Dry (hours)
- Provide adequate ventilation during paint application.
(1) Before use, stir well and wait for 10-15 mins for foam broken.
(2)Close lid tightly after use.
(3)Do not apply at 5°C or below and relative humidity not exceed 85%
(4)Store in a cool, dry place.
China National Standard on Wood Coating
China National CCC Obligated Environment Friendly Certification
- This product is inflammable. Keep away from sparks and open flames.
- Avoid skin contact and inhalation of spray mist.
- If the product comes in contact with the skin, wash thoroughly with warm water and soap or suitable cleaner.